Understanding the material
The behaviour of a rubber solution depends on polymer type, solids, tackifying components and solvent evaporation. Solids describe the non-volatile fraction, while viscosity describes flow under specified test conditions. Neither alone predicts the final bond. The grade must be evaluated on the intended substrates using the actual drying and assembly sequence.
Product Identity & Specifications
Chemical identity, physical characteristics and key specifications for Rubber Solution.
| Parameter | Description / value | Basis / application |
|---|---|---|
| Material identity | Rubber-based bonding solution | Formulated product, not a single pure chemical |
| Supplied presentation | Liquid adhesive | Identify the exact grade |
| Polymer / carrier | Declared in product documentation | Compatibility and handling |
| Solids content | Non-volatile fraction, % | Method and test conditions required |
| Viscosity | Specified flow or rotational measurement | Temperature, instrument and speed matter |
| Density | Mass per unit volume | State the measurement temperature |
| Substrate compatibility | Actual material pair | Include surface finish and treatment |
| Application method | Brush, roller or spray as qualified | Grade-specific equipment suitability |
| Open / assembly time | Specified working window | Film thickness and ambient conditions matter |
| Drying / activation | TDS-defined conditions | Do not transfer settings between grades |
| Bond performance | Initial and conditioned strength | Agreed test method and failure mode |
| Shelf life / packing | Current manufacturer information | Closed original packaging |
Identity and published standard
Adhesive specification and ASTM D903 bond testing
Prepared adhesives are formulation-specific mixtures. ASTM D903 provides a published method for comparing peel or stripping strength under defined test conditions; it does not set one universal pass value for every adhesive. Agree the substrate pair, conditioning and acceptance requirement for the selected grade.
View published test-method scopeThe current TDS, agreed test conditions and product quality documentation define the offered adhesive.
For further information and current COA/specification, please contact us.
Request current COA & specificationApplications & functional benefits
Contact bonding
Suitable formulations can be applied to compatible surfaces and assembled within the prescribed working window. Confirm whether one or both surfaces require coating.
Footwear component assembly
Evaluate a grade for the exact component materials and required flexibility. Temporary positioning and permanent bonding may need different formulations.
Industrial assembly
Selected rubber solutions can be assessed for flexible joints. Specify service temperature, loading and any contact with oils or other chemicals.
Choosing the appropriate bonding system
| Grade / form | Main distinction | Selection consideration |
|---|---|---|
| Natural-rubber-based solution | Polymer-specific tack and elasticity | Match service and ageing requirements. |
| Polychloroprene-based solution | Different crystallisation and bonding behaviour | Assess heat resistance and assembly conditions. |
| Formulated blend | Polymer and resin combination tailored to an application | Obtain the exact TDS and compatible thinning guidance. |
Formulation & processing
Manage solvent evaporation
Drying depends on film thickness, temperature, airflow and solvent composition. Follow the grade-specific assembly window and maintain controlled ventilation.
Avoid unapproved dilution
An arbitrary thinner can change polymer solubility, tack and drying behaviour. Use only the dilution instructions and compatible solvent system specified for the grade.
Distinguish handling and final strength
A joint that holds immediately may not yet have its final performance. Test after the stated conditioning period and relevant service exposure.
What to check in the specification
- Rubber type, solids and solvent composition
- Viscosity and application method
- Drying time, tack and open time
- Bond strength on the actual substrate combination
Current product documentation
Request the current TDS, SDS, specification and available batch COA or quality certificate. Include both substrate materials, surface preparation, application equipment and service conditions so the offered grade can be assessed.
Request documents for Rubber SolutionPacking, storage & handling
Packing and quotation details
Discuss the required net weight, sample quantity and delivery schedule with SBS. Packaging should be compatible with the material and carry product, manufacturer and batch identification. Confirm the offered pack size and shelf-life or retest information in the quotation; these depend on the selected grade.
Storage and safe handling
Keep the material in compatible, closed packaging under the manufacturer’s stated conditions. Use the current SDS to set ventilation, personal protection and fire precautions; storage and shelf life depend on formulation.
Frequently asked questions
Is rubber solution a single chemical?
No. It is a formulated mixture whose polymer and solvent composition depend on the grade.
Can any thinner be added?
No. Use the supplier’s specified compatible thinner and permitted addition guidance.
What details help compare two grades?
Compare polymer family, solids, viscosity test conditions, open time and bond results on the same substrates.
Technical information sources
Need more information?
Contact SBS for further product details, current COA, specification, packing and a quotation for your requirement.
Contact SBS for details and documents